ISO 9192 pdf download – Lawn and garden ride-on (riding) tractors –One-point tubular sleeve hitch

ISO 9192 pdf download – Lawn and garden ride-on (riding) tractors –One-point tubular sleeve hitch.
ISO 9192 specifies the requirements for the connection of implements or attachments to the rear of lawn and garden ride-on (riding) tractors by means of a one-point (single pin connection) hitch In association with a manual or power lift system. Standard dimensions for hitch point location, hitch tube and implement yoke are laid down to ensure the connection of specific implements or attachments.
It applies to lawn and garden ride-on (riding) tractors as defined below.
2 DefiniHons
For the purposes of this International Standard, the following definitions apply.
2.1 ride-on (riding) machine; lawn and garden tractor; turf (riding) tractor: Self-propelled machine on which an operator rides, designed primarily for cutting grass and auxiliary garden work. The cutting means may be an integral part of the machine or suspended from or attached to the machtne.
2.2 General (see figure 1)
2.2.1 hitch point Q:
a) Pivotal point of connection oF hitch to tractor
b) Actual point of connection to tractor when implement is attached.
2.2.2 Implement yoke 0: Clevis-shaped part attached to Implement, constructed to fit loosely to hitch tube and secured by hitch pin.
2.2.3 Implement connection point 0: Connection between the hitch and Implement.
2.3 HItch components (see figure 1 and figure 2)
2.3.1 hitch pin 0: Pin that connects implement to the hitch
2.3.2 hitch tube 0: Tube portion on the hitch which receives the implement yoke.
2.3.3 hItch ball 0: Portion of the hitch assembly containing hitch tube, stabilizer bolts, and hoIeg for connection to tractor frame at hitch point.
2.3.4 stabilizer bolt 0: Bolt that Is used for acIsting clearance between hitch bail and implement yoke.