ISO 6727 pdf download – Road vehicles — Motorcycles andmopeds- Symbols for controls,indicators and tell-talesd –

ISO 6727 pdf download – Road vehicles — Motorcycles andmopeds- Symbols for controls,indicators and tell-talesd.
4.1 The symbols shall be such that, when viewed by the rider, from their normal seated position or normal operated position, they are recognizable as shown in Annexc.A to Q.
4.2 The symbol shall be placed on or adjacent to. the control or tell-tale to be identified. Where this is not possible, the symbol and the control or teIl’tak’ shall be joined by a continuous line as short as possible
4.3 The symbols and signs shall be as given in Annexes A to I, and AnncxN. Additional symbols are given In Annexes M and 0. Minor deviations to the symbols and signs are permitted, provided they arc necessary to reproduce an accurate representation to the riders line olsight.
NOTE Additional annexes can be included In future editions of ibis document if necessary.
4.4 In developing the symbols and signs shown In Annexes A to 0. legIbility factors such as line thickness, gaps between lines, symbol and arrow shapes. etc. were carefully considered. Modifications that improve legibility are permitted in the circumstances specified in 4Ad. 4,42 and 4,4. When modifying symbol elements, the graphic designer should consult IEC 80416-1. ISO 8041 6-2, IEC 80416.3, and ISO 80416-4.
4.4.1 Limitations inherent in some reproduction and display technologies can require increased line thickness or other minor modifications of symbols, Such modifications are acceptable provided the symbol remains unchanged in its basic graphical elements and is easily discernible by the operator.
4.4.2 Additionally, to improve the appearance and perceptibility of a graphical symbol or to coordinate with the design of the equipment to which it is applied, it can be necessary to change the line thickness or to round off the corners of the symbol. The graphic designer is normally free to make such changes provided that the essential perceptible characteristics of the symbol are maintained.
4.4.3 The graphic designer may render a symbol in either outline or solid form unless this is otherwise prohibited by the symbol description.
4.S The vehicle shapes shown in this document are not intended to be restrictive. Modifications to vehicle shape may he introduced by designers in order to better represent the true exterior shape of a given vehicle. Except for vehicle shape, no other symbol element shall be changed, except as provided in 4,4 or in the specific symbol’s description.
4.6 II. in a symbol, a vehicle or parts of a vehicle are shown in a side view, a vehicle driving from right to left shall be used,
4.7 For actual use, all symbols shall be reproduced large enough to he easily discernible by the operator, See IEC 80416-3 for guidelines on the proper sizing of symbols. Symbols shall be used in the orientations shown in this document unless otherwise noted for individual symbols.
4.8 For most controls, a light symbol on a dark background Is preferred. Displays may use either a light symbol on a dark background or a dark symbol on a light background, depending on which alternative provides the best visual perception. When a symbol image is reversed (for example black to white and vice versa), it shall be done for the entire symbol.
4.12 ISO/IEC registration numbers are shown For symbols In this document where applicable.
Registration numbers below 5 000 refer to ISO 7000. Registration numbers above 5 000 refer to
JEC 60417, Artwork in this document might difter from the artwork shown in IEC 60417, ISO 7000 or the JEC/ISO database on graphical symbols for use on equipment. In this case, the artwork in this document shall be used.
4.13 The symbol numbers not represented are reserved for those symbol5 still under consideration at the time of publication of this document. It is envisaged that the status of these symbols and the numbers will be resolved by the next revision of this document.
4.14 Symbols in the annexes (except Annex 0) of this document are presented at 32 % of original size. The grid marks L denote the corners of the original 75 mm square. The grid marks are not part of the symbol but are provided to ensure consistent presentation of all symbol graphics.