AS ISO 7134 pdf download – Earth-moving machinery -Graders —Terminology and commercial specifications.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (Including any amendments) applies.
ISO 5010, Earth-movmg machinery — Rubber-ryred machines — Steering requirements ISO 6746-1. Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine
ISO 6746-2, Earth-moving machinery Definitions of dimensions and codes Port 2: Equipment and attachment-s
ISO 7457. Earth-moving machinery — Determination of turning dimensions of wheeled machines
ISO 15550:2002, internal combustion engines — Determination and met hod for the measurement of engine
power — General requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6746-1 and ISO 6746-2, and the following apply.
3.1 General
3.1.1
grader
sell-propelled wheeled machine with an adjustable blade positioned between the front and rear axles, which can be equipped with a front-mounted blade or scarifier that can also be located between the front and rear axles
[SOURCE: SOURCE: ISO 6165:2012,4.81
3.1.2
base machine
grader without equipment, as described by the manufacturer’s specifications, but provided with the necessary mountings to secure the attachments
3.1.3
equipment
set of components mounted onto the base machine to fulfil the primary design function
3.1.4
attachment
optional assembly of components that can be mounted onto the base machine for a specific use
3.1.5
component
part or an assembly of parts of a base machine. equipment or an attachment
AS ISO 7134 pdf download – Earth-moving machinery -Graders —Terminology and commercial specifications
